Blocked Hp Printhead

We help clean your clogged printhead at a small fee, blocked printhead can be a nuisance, they are inky too. If you have some time you can try this first: Blocked Hp printhead you Fold the dry paper towel into quarters and place it in the plastic container then, Pour about two inches of hot water on top of the paper towel so that it is completely submerged. Open up the printer and remove all of the ink cartridges from the machine. Set the cartridges aside on a separate paper towel while you continue the printhead cleaning process. Make sure the cartridges are facing up on the paper towel. Lift up on the gray latch behind the cartridge carriage that holds the cartridges. This will release the printhead from the printer. Pull the printhead up and out to remove it from the machine. Dampen the lint-free cloth with hot water. Gently wipe away an excess ink on the printhead nozzle. Place the printhead in the container with the submerged paper towels. The nozzle should be facing down. Be careful not to touch the nozzle as it can be damaged easily. Let the blocked hp printhead soak for about ten minutes. Then remove it from the container and set it on a dry paper towel to dry for fifteen minutes. The nozzle should be facing up. Reinstall the hp printhead back into the printer. Don’t forget to secure the latch! Then reinstall the cartridges and run the cleaning function on the machine again.